Tutorials
Step-by-Step Tutorials
These tutorials teach the True Robotics Design Playground by making real parts. Each takes five to fifteen minutes and ends with something you can 3D print. Start in Basic mode with a phone stand and a robot wheel hub. Then, in Standard, draw a square four ways, build a mounting plate, a standoff, a slot, a bracket, a handle and a funnel, and finish with a spinning wheel assembly.

Which tutorial should I start with?#
If you are brand new, start with the two Basic mode tutorials, where you build with shapes. Then make your first Standard part in five minutes and work down the rest of the list. Each tutorial builds on the one before it.
| Tutorial | You will learn | About |
|---|---|---|
| Phone stand (Basic) | Dragging shapes in, typed sizes and positions, a box hole, Group | 10 minutes |
| Robot wheel hub (Basic) | Cylinders, cylinder holes, Duplicate for evenly spaced holes | 10 minutes |
| Draw a square four ways (Standard) | Corner rectangle, center rectangle, lines, polygon, Equal, Horizontal, Dimension, Extrude | 10 minutes |
| Robot mounting plate with holes (Standard) | Construction geometry, typed circle diameters, distances between lines | 15 minutes |
| Hex standoff (Standard) | Polygon, across the flats dimension, a center hole | 5 minutes |
| Cut a slot through a plate (Standard) | Sketching on a face, 3 point arcs, Tangent, Cut | 15 minutes |
| L bracket with a face sketch (Standard) | Building up with Add, sketching on a side face, cutting a hole with Cut | 10 minutes |
| Curved handle with Sweep (Standard) | A path of lines and a tangent arc, a profile at its start, Sweep | 10 minutes |
| Funnel with Loft (Standard) | An Offset plane, sketching on it, Loft, hollowing with Remove | 10 minutes |
| A wheel that spins on an axle (Assembly) | New Assembly, inserting parts, a fixed part, a Revolute mate, Flip, dragging to test | 10 minutes |
What do I need?#
- A computer, Chromebook or tablet with a web browser. A mouse makes drawing easiest.
- The True Robotics Design Playground at design.truerobotics.org.
- A 3D printer and its slicer if you want to print your parts. You can design without one.
Good to know: All in inches
Every tutorial works in inches, the units new projects start in, with friendly sizes like 1/4 in and 1/2 in. Want to use centimeters? Pick Centimeters from the units button in the purple bar and type your own sizes, or type the tutorial sizes with their unit, like 1/4 in, and the app converts them.
Tip: Teachers
Each tutorial makes a good warm-up for a class period. For teachers has tips for saving, naming files and collecting work.
Pick a tutorial and have fun building. We can't wait to see what you make!