<?xml version="1.0" encoding="UTF-8"?>
<urlset xmlns="http://www.sitemaps.org/schemas/sitemap/0.9" xmlns:image="http://www.google.com/schemas/sitemap-image/1.1" xmlns:video="http://www.google.com/schemas/sitemap-video/1.1">
<url><loc>https://design.truerobotics.org/</loc><lastmod>2026-10-08</lastmod></url>
<url><loc>https://design.truerobotics.org/help/</loc><lastmod>2026-10-08</lastmod><image:image><image:loc>https://design.truerobotics.org/help-media/shots/shot-workspace-tour.webp</image:loc></image:image><image:image><image:loc>https://design.truerobotics.org/help-media/photos/photo-mounting-plate-1280.webp</image:loc></image:image></url>
<url><loc>https://design.truerobotics.org/help/getting-started/</loc><lastmod>2026-10-07</lastmod><image:image><image:loc>https://design.truerobotics.org/help-media/videos/video-first-part.webp</image:loc></image:image><image:image><image:loc>https://design.truerobotics.org/help-media/shots/shot-new-project-basic.webp</image:loc></image:image><image:image><image:loc>https://design.truerobotics.org/help-media/shots/shot-save-status-not-saved.webp</image:loc></image:image><image:image><image:loc>https://design.truerobotics.org/help-media/shots/shot-home.webp</image:loc></image:image><image:image><image:loc>https://design.truerobotics.org/help-media/shots/shot-new-project-dialog.webp</image:loc></image:image><image:image><image:loc>https://design.truerobotics.org/help-media/shots/shot-autosave-prompt.webp</image:loc></image:image><image:image><image:loc>https://design.truerobotics.org/help-media/shots/shot-rectangle-typing.webp</image:loc></image:image><image:image><image:loc>https://design.truerobotics.org/help-media/shots/shot-export-dialog.webp</image:loc></image:image><image:image><image:loc>https://design.truerobotics.org/help-media/photos/photo-first-drive-1280.webp</image:loc></image:image><video:video><video:thumbnail_loc>https://design.truerobotics.org/help-media/videos/video-first-part.webp</video:thumbnail_loc><video:title>Your first part, from a blank project to an STL file.</video:title><video:description>We click New Project and pick the Standard picture, then say Yes to autosave and name the file My First Part. We pick the Top plane, press Sketch, choose the Corner rectangle and click the origin. Typing 3, Tab, 2 and Enter makes an exact 3 by 2 inch rectangle, and Enter again finishes the sketch. Extrude with a depth of 1/2 makes the block, and Export saves My First Part.stl to the Downloads folder.</video:description><video:content_loc>https://design.truerobotics.org/help-media/videos/video-first-part.mp4</video:content_loc><video:duration>81</video:duration><video:family_friendly>yes</video:family_friendly></video:video></url>
<url><loc>https://design.truerobotics.org/help/how-it-works/</loc><lastmod>2026-10-08</lastmod><image:image><image:loc>https://design.truerobotics.org/help-media/shots/shot-workspace-new.webp</image:loc></image:image><image:image><image:loc>https://design.truerobotics.org/help-media/shots/shot-regions.webp</image:loc></image:image><image:image><image:loc>https://design.truerobotics.org/help-media/videos/video-edit-feature.webp</image:loc></image:image><image:image><image:loc>https://design.truerobotics.org/help-media/photos/photo-motor-mounts-1280.webp</image:loc></image:image><video:video><video:thumbnail_loc>https://design.truerobotics.org/help-media/videos/video-edit-feature.webp</video:thumbnail_loc><video:title>Change an early feature and everything after it rebuilds.</video:title><video:description>We double-click Extrude 1 in the feature tree, and the features after it dim while we edit. Typing 1 makes the block twice as tall. When we press Enter, the hole is cut again after the taller block, so it still goes all the way through.</video:description><video:content_loc>https://design.truerobotics.org/help-media/videos/video-edit-feature.mp4</video:content_loc><video:duration>30</video:duration><video:family_friendly>yes</video:family_friendly></video:video></url>
<url><loc>https://design.truerobotics.org/help/workspace-tour/</loc><lastmod>2026-10-08</lastmod><image:image><image:loc>https://design.truerobotics.org/help-media/shots/shot-workspace-tour.webp</image:loc></image:image><image:image><image:loc>https://design.truerobotics.org/help-media/shots/shot-app-bar.webp</image:loc></image:image><image:image><image:loc>https://design.truerobotics.org/help-media/shots/shot-help-button.webp</image:loc></image:image><image:image><image:loc>https://design.truerobotics.org/help-media/shots/shot-sketch-toolbar.webp</image:loc></image:image><image:image><image:loc>https://design.truerobotics.org/help-media/shots/shot-tree-nested.webp</image:loc></image:image><image:image><image:loc>https://design.truerobotics.org/help-media/shots/shot-panel-collapsed.webp</image:loc></image:image><image:image><image:loc>https://design.truerobotics.org/help-media/shots/shot-view-cube.webp</image:loc></image:image><image:image><image:loc>https://design.truerobotics.org/help-media/shots/shot-left-panel-feature.webp</image:loc></image:image><image:image><image:loc>https://design.truerobotics.org/help-media/shots/shot-tool-panel.webp</image:loc></image:image><image:image><image:loc>https://design.truerobotics.org/help-media/shots/shot-exit-sketch.webp</image:loc></image:image><image:image><image:loc>https://design.truerobotics.org/help-media/shots/shot-ipad-sketch.webp</image:loc></image:image><image:image><image:loc>https://design.truerobotics.org/help-media/shots/shot-phone-drawer.webp</image:loc></image:image><image:image><image:loc>https://design.truerobotics.org/help-media/shots/shot-phone-menu.webp</image:loc></image:image><image:image><image:loc>https://design.truerobotics.org/help-media/shots/shot-phone-extrude.webp</image:loc></image:image><image:image><image:loc>https://design.truerobotics.org/help-media/shots/shot-settings-dialog.webp</image:loc></image:image></url>
<url><loc>https://design.truerobotics.org/help/moving-around/</loc><lastmod>2026-10-07</lastmod><image:image><image:loc>https://design.truerobotics.org/help-media/videos/video-navigation.webp</image:loc></image:image><image:image><image:loc>https://design.truerobotics.org/help-media/videos/video-touch-trackpad.webp</image:loc></image:image><image:image><image:loc>https://design.truerobotics.org/help-media/shots/shot-view-cube.webp</image:loc></image:image><video:video><video:thumbnail_loc>https://design.truerobotics.org/help-media/videos/video-navigation.webp</video:thumbnail_loc><video:title>Rotate with a left drag, pan with a right drag, zoom with the wheel, and jump to any view with the view cube.</video:title><video:description>Dragging with the left mouse button on empty space rotates the view around the model, dragging with the right button pans, and the scroll wheel zooms toward the pointer. Clicking faces, edges and corners of the view cube turns the view to look from there, and an arrow beside it turns the view 90 degrees. The Home button returns to the isometric view, zoomed to fit everything.</video:description><video:content_loc>https://design.truerobotics.org/help-media/videos/video-navigation.mp4</video:content_loc><video:duration>58</video:duration><video:family_friendly>yes</video:family_friendly></video:video><video:video><video:thumbnail_loc>https://design.truerobotics.org/help-media/videos/video-touch-trackpad.webp</video:thumbnail_loc><video:title>On a touch screen: one finger rotates, two fingers pan and pinch to zoom.</video:title><video:description>On a tablet, dragging one finger across empty space rotates the view. Pinching with two fingers zooms, and sliding two fingers pans. Tapping the view cube arrow turns the view 90 degrees, and the Home and Zoom to fit buttons bring everything back into view.</video:description><video:content_loc>https://design.truerobotics.org/help-media/videos/video-touch-trackpad.mp4</video:content_loc><video:duration>45</video:duration><video:family_friendly>yes</video:family_friendly></video:video></url>
<url><loc>https://design.truerobotics.org/help/projects-and-saving/</loc><lastmod>2026-10-07</lastmod><image:image><image:loc>https://design.truerobotics.org/help-media/videos/video-saving-folder.webp</image:loc></image:image><image:image><image:loc>https://design.truerobotics.org/help-media/shots/shot-autosave-prompt.webp</image:loc></image:image><image:image><image:loc>https://design.truerobotics.org/help-media/shots/shot-save-status-not-saved.webp</image:loc></image:image><image:image><image:loc>https://design.truerobotics.org/help-media/shots/shot-save-status-saved.webp</image:loc></image:image><image:image><image:loc>https://design.truerobotics.org/help-media/shots/shot-save-status-permission.webp</image:loc></image:image><image:image><image:loc>https://design.truerobotics.org/help-media/shots/shot-open-badges.webp</image:loc></image:image><image:image><image:loc>https://design.truerobotics.org/help-media/shots/shot-open-project-dialog.webp</image:loc></image:image><image:image><image:loc>https://design.truerobotics.org/help-media/videos/video-open-download.webp</image:loc></image:image><image:image><image:loc>https://design.truerobotics.org/help-media/shots/shot-more-menu.webp</image:loc></image:image><image:image><image:loc>https://design.truerobotics.org/help-media/shots/shot-open-delete-confirm.webp</image:loc></image:image><video:video><video:thumbnail_loc>https://design.truerobotics.org/help-media/videos/video-saving-folder.webp</video:thumbnail_loc><video:title>Say Yes to autosave once, and every change saves to your file.</video:title><video:description>We click New Project and pick Standard, and the app asks whether to autosave. We click Yes, autosave, and the computer&apos;s save window opens so you can pick a folder and type a name; the video skips past it. The project takes the name Robot Plate, and the purple bar says Saved to Robot Plate.trdesign. After each change it shows Saving for a moment, then Saved again.</video:description><video:content_loc>https://design.truerobotics.org/help-media/videos/video-saving-folder.mp4</video:content_loc><video:duration>66</video:duration><video:family_friendly>yes</video:family_friendly></video:video><video:video><video:thumbnail_loc>https://design.truerobotics.org/help-media/videos/video-open-download.webp</video:thumbnail_loc><video:title>Open saved projects, download a copy, or drop a file to open it.</video:title><video:description>Open Project lists the projects saved in this browser, newest first, and clicking Bracket opens it. The three dots menu has Download a copy, which saves a .trdesign file to the Downloads folder. Back in Open Project, dropping a .trdesign file onto the window opens it too.</video:description><video:content_loc>https://design.truerobotics.org/help-media/videos/video-open-download.mp4</video:content_loc><video:duration>49</video:duration><video:family_friendly>yes</video:family_friendly></video:video></url>
<url><loc>https://design.truerobotics.org/help/install-and-offline/</loc><lastmod>2026-10-07</lastmod><image:image><image:loc>https://design.truerobotics.org/help-media/shots/shot-install-button.webp</image:loc></image:image><image:image><image:loc>https://design.truerobotics.org/help-media/shots/shot-install-ipad-steps.webp</image:loc></image:image><image:image><image:loc>https://design.truerobotics.org/help-media/shots/shot-offline-chip.webp</image:loc></image:image><image:image><image:loc>https://design.truerobotics.org/help-media/shots/shot-help-video-offline.webp</image:loc></image:image><image:image><image:loc>https://design.truerobotics.org/help-media/shots/shot-update-prompt.webp</image:loc></image:image></url>
<url><loc>https://design.truerobotics.org/help/basic/</loc><lastmod>2026-10-07</lastmod><image:image><image:loc>https://design.truerobotics.org/help-media/shots/shot-basic-workspace.webp</image:loc></image:image><image:image><image:loc>https://design.truerobotics.org/help-media/shots/shot-new-project-basic.webp</image:loc></image:image><image:image><image:loc>https://design.truerobotics.org/help-media/shots/shot-open-badges.webp</image:loc></image:image><image:image><image:loc>https://design.truerobotics.org/help-media/shots/shot-basic-phone.webp</image:loc></image:image></url>
<url><loc>https://design.truerobotics.org/help/basic/shapes/</loc><lastmod>2026-10-07</lastmod><image:image><image:loc>https://design.truerobotics.org/help-media/videos/video-basic-shapes.webp</image:loc></image:image><image:image><image:loc>https://design.truerobotics.org/help-media/shots/shot-basic-catalog.webp</image:loc></image:image><image:image><image:loc>https://design.truerobotics.org/help-media/shots/shot-basic-drag-in.webp</image:loc></image:image><image:image><image:loc>https://design.truerobotics.org/help-media/shots/shot-basic-catalog-search.webp</image:loc></image:image><image:image><image:loc>https://design.truerobotics.org/help-media/shots/shot-basic-every-shape.webp</image:loc></image:image><image:image><image:loc>https://design.truerobotics.org/help-media/shots/shot-basic-star-settings.webp</image:loc></image:image><video:video><video:thumbnail_loc>https://design.truerobotics.org/help-media/videos/video-basic-shapes.webp</video:thumbnail_loc><video:title>Drag shapes onto the workplane, or click one to drop it in the middle.</video:title><video:description>We drag a box from the catalog onto the workplane, and it shows exactly where it will land before we let go. A cylinder and a cone follow, each snapping to the grid. Clicking the Sphere tile, without dragging, drops a sphere on a free spot near the middle of the view.</video:description><video:content_loc>https://design.truerobotics.org/help-media/videos/video-basic-shapes.mp4</video:content_loc><video:duration>46</video:duration><video:family_friendly>yes</video:family_friendly></video:video></url>
<url><loc>https://design.truerobotics.org/help/basic/move-and-resize/</loc><lastmod>2026-10-07</lastmod><image:image><image:loc>https://design.truerobotics.org/help-media/videos/video-basic-sizes.webp</image:loc></image:image><image:image><image:loc>https://design.truerobotics.org/help-media/shots/shot-basic-handles.webp</image:loc></image:image><image:image><image:loc>https://design.truerobotics.org/help-media/shots/shot-basic-size-typing.webp</image:loc></image:image><image:image><image:loc>https://design.truerobotics.org/help-media/shots/shot-basic-inspector.webp</image:loc></image:image><image:image><image:loc>https://design.truerobotics.org/help-media/shots/shot-basic-snap-menu.webp</image:loc></image:image><image:image><image:loc>https://design.truerobotics.org/help-media/shots/shot-basic-align-menu.webp</image:loc></image:image><image:image><image:loc>https://design.truerobotics.org/help-media/shots/shot-basic-mirror-menu.webp</image:loc></image:image><image:image><image:loc>https://design.truerobotics.org/help-media/shots/shot-basic-workplane.webp</image:loc></image:image><video:video><video:thumbnail_loc>https://design.truerobotics.org/help-media/videos/video-basic-sizes.webp</video:thumbnail_loc><video:title>Type exact sizes on the labels, then nudge and lift with the arrow keys.</video:title><video:description>We drag a box in and click its width label. Typing 3 and pressing Enter makes it exactly 3 inches wide, and the depth and height labels take 2 and 1/2 the same way. The arrow keys nudge the box one snap step at a time. Ctrl and Up lifts it off the workplane, and Ctrl and Down sets it back down.</video:description><video:content_loc>https://design.truerobotics.org/help-media/videos/video-basic-sizes.mp4</video:content_loc><video:duration>59</video:duration><video:family_friendly>yes</video:family_friendly></video:video></url>
<url><loc>https://design.truerobotics.org/help/basic/holes-and-groups/</loc><lastmod>2026-10-07</lastmod><image:image><image:loc>https://design.truerobotics.org/help-media/videos/video-basic-holes.webp</image:loc></image:image><image:image><image:loc>https://design.truerobotics.org/help-media/shots/shot-basic-hole-inside.webp</image:loc></image:image><image:image><image:loc>https://design.truerobotics.org/help-media/shots/shot-basic-grouped.webp</image:loc></image:image><image:image><image:loc>https://design.truerobotics.org/help-media/shots/shot-basic-make-hole.webp</image:loc></image:image><video:video><video:thumbnail_loc>https://design.truerobotics.org/help-media/videos/video-basic-holes.webp</video:thumbnail_loc><video:title>Put a hole where you want it, then group to cut it.</video:title><video:description>The gray cylinder is a hole, so it shows see through. We drag it into the red box. Ctrl and A selects both shapes, and Ctrl and G groups them, so the hole cuts right through the box.</video:description><video:content_loc>https://design.truerobotics.org/help-media/videos/video-basic-holes.mp4</video:content_loc><video:duration>34</video:duration><video:family_friendly>yes</video:family_friendly></video:video></url>
<url><loc>https://design.truerobotics.org/help/sketch/</loc><lastmod>2026-10-08</lastmod><image:image><image:loc>https://design.truerobotics.org/help-media/shots/shot-sketch-dialog-waiting.webp</image:loc></image:image><image:image><image:loc>https://design.truerobotics.org/help-media/shots/shot-exit-sketch.webp</image:loc></image:image><image:image><image:loc>https://design.truerobotics.org/help-media/shots/shot-sketch-toolbar.webp</image:loc></image:image><image:image><image:loc>https://design.truerobotics.org/help-media/shots/shot-tool-panel.webp</image:loc></image:image><image:image><image:loc>https://design.truerobotics.org/help-media/shots/shot-discard-question.webp</image:loc></image:image><image:image><image:loc>https://design.truerobotics.org/help-media/shots/shot-blue-vs-black.webp</image:loc></image:image><image:image><image:loc>https://design.truerobotics.org/help-media/shots/shot-inference-glyphs.webp</image:loc></image:image><image:image><image:loc>https://design.truerobotics.org/help-media/shots/shot-sketch-snap-center.webp</image:loc></image:image><image:image><image:loc>https://design.truerobotics.org/help-media/videos/video-sketch-snap.webp</image:loc></image:image><video:video><video:thumbnail_loc>https://design.truerobotics.org/help-media/videos/video-sketch-snap.webp</video:thumbnail_loc><video:title>Snap while you draw, and snap while you drag.</video:title><video:description>We draw a 2 inch circle with the Circle tool, then point at its center dot until an orange ring shows the snap and click there for a 1 inch circle with the same center. A 1/2 inch circle goes off to the right, and the green check goes back to Select. Dragging the small circle by its center dot onto the big center snaps it there, so all three circles share one center.</video:description><video:content_loc>https://design.truerobotics.org/help-media/videos/video-sketch-snap.mp4</video:content_loc><video:duration>57</video:duration><video:family_friendly>yes</video:family_friendly></video:video></url>
<url><loc>https://design.truerobotics.org/help/sketch/select/</loc><lastmod>2026-10-07</lastmod><image:image><image:loc>https://design.truerobotics.org/help-media/shots/shot-box-select.webp</image:loc></image:image></url>
<url><loc>https://design.truerobotics.org/help/sketch/line/</loc><lastmod>2026-10-07</lastmod><image:image><image:loc>https://design.truerobotics.org/help-media/videos/video-line-chain.webp</image:loc></image:image><image:image><image:loc>https://design.truerobotics.org/help-media/shots/shot-line-typing.webp</image:loc></image:image><video:video><video:thumbnail_loc>https://design.truerobotics.org/help-media/videos/video-line-chain.webp</video:thumbnail_loc><video:title>Chain lines, type exact lengths and close the shape.</video:title><video:description>We press L and click the origin to start a line. Pointing right and typing 2 places an exact 2 inch segment, and pointing up and typing 1 1/4 places the next one. A click level with the start adds the third side, and clicking the first point closes the shape, which fills light purple. Pressing Esc goes back to the Select tool.</video:description><video:content_loc>https://design.truerobotics.org/help-media/videos/video-line-chain.mp4</video:content_loc><video:duration>48</video:duration><video:family_friendly>yes</video:family_friendly></video:video></url>
<url><loc>https://design.truerobotics.org/help/sketch/rectangle/</loc><lastmod>2026-10-07</lastmod><image:image><image:loc>https://design.truerobotics.org/help-media/videos/video-square-rectangle.webp</image:loc></image:image><image:image><image:loc>https://design.truerobotics.org/help-media/shots/shot-rectangle-typing.webp</image:loc></image:image><video:video><video:thumbnail_loc>https://design.truerobotics.org/help-media/videos/video-square-rectangle.webp</video:thumbnail_loc><video:title>Draw an exact square with the Corner rectangle, then make it a cube.</video:title><video:description>In a sketch on the Top plane, we press G for the Corner rectangle and click the origin. We type 1, press Tab, type 1 and press Enter, and an exact 1 inch square appears in black. Enter finishes the sketch, Shift+E opens Extrude, and a depth of 1 turns the square into a cube.</video:description><video:content_loc>https://design.truerobotics.org/help-media/videos/video-square-rectangle.mp4</video:content_loc><video:duration>45</video:duration><video:family_friendly>yes</video:family_friendly></video:video></url>
<url><loc>https://design.truerobotics.org/help/sketch/center-rectangle/</loc><lastmod>2026-10-07</lastmod><image:image><image:loc>https://design.truerobotics.org/help-media/shots/shot-center-rectangle.webp</image:loc></image:image></url>
<url><loc>https://design.truerobotics.org/help/sketch/circle/</loc><lastmod>2026-10-07</lastmod><image:image><image:loc>https://design.truerobotics.org/help-media/videos/video-circle-diameter.webp</image:loc></image:image><image:image><image:loc>https://design.truerobotics.org/help-media/shots/shot-circle-typing.webp</image:loc></image:image><video:video><video:thumbnail_loc>https://design.truerobotics.org/help-media/videos/video-circle-diameter.webp</video:thumbnail_loc><video:title>Type a diameter for an exact circle. Circles inside a shape become holes.</video:title><video:description>Inside a 3 by 2 inch rectangle, we press C for the Circle tool and click where the first hole goes. Typing 1/2 and pressing Enter makes an exact half inch circle, and the tool stays on for the second hole. After finishing the sketch, a 1/4 inch extrude turns it into a plate with two holes.</video:description><video:content_loc>https://design.truerobotics.org/help-media/videos/video-circle-diameter.mp4</video:content_loc><video:duration>76</video:duration><video:family_friendly>yes</video:family_friendly></video:video></url>
<url><loc>https://design.truerobotics.org/help/sketch/arc/</loc><lastmod>2026-10-07</lastmod><image:image><image:loc>https://design.truerobotics.org/help-media/shots/shot-arc-third-point.webp</image:loc></image:image></url>
<url><loc>https://design.truerobotics.org/help/sketch/polygon/</loc><lastmod>2026-10-07</lastmod><image:image><image:loc>https://design.truerobotics.org/help-media/videos/video-hexagon-across-flats.webp</image:loc></image:image><image:image><image:loc>https://design.truerobotics.org/help-media/shots/shot-polygon-sides.webp</image:loc></image:image><image:image><image:loc>https://design.truerobotics.org/help-media/shots/shot-hexagon-across-flats.webp</image:loc></image:image><video:video><video:thumbnail_loc>https://design.truerobotics.org/help-media/videos/video-hexagon-across-flats.webp</video:thumbnail_loc><video:title>Draw a hexagon, size it across the flats, and extrude a standoff.</video:title><video:description>We press P for the Polygon tool, click the origin and place a level corner, which makes a hexagon with flat top and bottom. With the Dimension tool we click the top and bottom sides and type 3/8, so it measures 3/8 inch across the flats. A 1/8 inch circle at the center makes the hole, and the sketch turns fully defined. A 1/2 inch extrude finishes the standoff.</video:description><video:content_loc>https://design.truerobotics.org/help-media/videos/video-hexagon-across-flats.mp4</video:content_loc><video:duration>84</video:duration><video:family_friendly>yes</video:family_friendly></video:video></url>
<url><loc>https://design.truerobotics.org/help/sketch/spline/</loc><lastmod>2026-10-08</lastmod></url>
<url><loc>https://design.truerobotics.org/help/sketch/trim/</loc><lastmod>2026-10-08</lastmod><image:image><image:loc>https://design.truerobotics.org/help-media/videos/video-sketch-trim.webp</image:loc></image:image><image:image><image:loc>https://design.truerobotics.org/help-media/shots/shot-trim-hover.webp</image:loc></image:image><image:image><image:loc>https://design.truerobotics.org/help-media/shots/shot-trim-drag.webp</image:loc></image:image><video:video><video:thumbnail_loc>https://design.truerobotics.org/help-media/videos/video-sketch-trim.webp</video:thumbnail_loc><video:title>Click a piece to trim it, or drag across several at once.</video:title><video:description>We draw two pairs of overlapping 1 inch circles and press K for the Trim tool. Pointing at a piece inside the top overlap turns it red, and a click removes it. Trimming the other inside piece leaves one clean outline that fills light purple. On the bottom pair, one drag across the overlap trims both pieces at once, and a 1/4 inch extrude turns both outlines into parts.</video:description><video:content_loc>https://design.truerobotics.org/help-media/videos/video-sketch-trim.mp4</video:content_loc><video:duration>97</video:duration><video:family_friendly>yes</video:family_friendly></video:video></url>
<url><loc>https://design.truerobotics.org/help/sketch/fillet/</loc><lastmod>2026-10-08</lastmod><image:image><image:loc>https://design.truerobotics.org/help-media/videos/video-sketch-fillet.webp</image:loc></image:image><image:image><image:loc>https://design.truerobotics.org/help-media/shots/shot-fillet-preview.webp</image:loc></image:image><image:image><image:loc>https://design.truerobotics.org/help-media/shots/shot-fillet-picked.webp</image:loc></image:image><video:video><video:thumbnail_loc>https://design.truerobotics.org/help-media/videos/video-sketch-fillet.webp</video:thumbnail_loc><video:title>Round one corner with a click, or a whole shape at once.</video:title><video:description>In a sketch, we draw a 3 by 2 inch rectangle from the origin. We press O for Fillet, set the Radius box to 1/4 and click the top right corner, which turns into a smooth curve. Clicking the bottom side picks the other three corners, and Enter rounds them all at once. After finishing the sketch, a 1/4 inch extrude makes a plate with rounded corners.</video:description><video:content_loc>https://design.truerobotics.org/help-media/videos/video-sketch-fillet.mp4</video:content_loc><video:duration>89</video:duration><video:family_friendly>yes</video:family_friendly></video:video></url>
<url><loc>https://design.truerobotics.org/help/sketch/chamfer/</loc><lastmod>2026-10-08</lastmod><image:image><image:loc>https://design.truerobotics.org/help-media/shots/shot-chamfer-preview.webp</image:loc></image:image><image:image><image:loc>https://design.truerobotics.org/help-media/shots/shot-chamfer-corners.webp</image:loc></image:image></url>
<url><loc>https://design.truerobotics.org/help/sketch/mirror/</loc><lastmod>2026-10-08</lastmod><image:image><image:loc>https://design.truerobotics.org/help-media/videos/video-sketch-mirror.webp</image:loc></image:image><image:image><image:loc>https://design.truerobotics.org/help-media/shots/shot-sketch-mirror.webp</image:loc></image:image><video:video><video:thumbnail_loc>https://design.truerobotics.org/help-media/videos/video-sketch-mirror.webp</video:thumbnail_loc><video:title>Mirror across a line or an axis, and the copies follow every change.</video:title><video:description>On a centered 3 by 2 inch rectangle, we draw a 1/4 inch hole near the top right corner. We press X for Mirror, click the hole, press Enter and click the up and down axis, and a copy appears on the left. Mirroring both holes across the side to side axis makes four. Changing the first hole to 3/8 inch resizes all four, because the copies stay tied to it.</video:description><video:content_loc>https://design.truerobotics.org/help-media/videos/video-sketch-mirror.mp4</video:content_loc><video:duration>102</video:duration><video:family_friendly>yes</video:family_friendly></video:video></url>
<url><loc>https://design.truerobotics.org/help/sketch/linear-pattern/</loc><lastmod>2026-10-07</lastmod><image:image><image:loc>https://design.truerobotics.org/help-media/shots/shot-sketch-linear-pattern.webp</image:loc></image:image><image:image><image:loc>https://design.truerobotics.org/help-media/shots/shot-sketch-linear-grid.webp</image:loc></image:image></url>
<url><loc>https://design.truerobotics.org/help/sketch/circular-pattern/</loc><lastmod>2026-10-07</lastmod><image:image><image:loc>https://design.truerobotics.org/help-media/videos/video-sketch-circular-pattern.webp</image:loc></image:image><image:image><image:loc>https://design.truerobotics.org/help-media/shots/shot-sketch-circular-pattern.webp</image:loc></image:image><video:video><video:thumbnail_loc>https://design.truerobotics.org/help-media/videos/video-sketch-circular-pattern.webp</video:thumbnail_loc><video:title>Repeat a hole around a center with Circular pattern.</video:title><video:description>We draw a 2 inch circle on the origin and a 1/4 inch hole to the right of the center. We press U for Circular pattern, click the hole and press Enter, and copies appear around the origin. Typing 6 in the Count box spaces six holes evenly all the way around, and Make 5 copies adds them. A 1/4 inch extrude turns the sketch into a wheel.</video:description><video:content_loc>https://design.truerobotics.org/help-media/videos/video-sketch-circular-pattern.mp4</video:content_loc><video:duration>86</video:duration><video:family_friendly>yes</video:family_friendly></video:video></url>
<url><loc>https://design.truerobotics.org/help/sketch/construction/</loc><lastmod>2026-10-08</lastmod><image:image><image:loc>https://design.truerobotics.org/help-media/shots/shot-tut-plate-sketch.webp</image:loc></image:image></url>
<url><loc>https://design.truerobotics.org/help/sketch/dimension/</loc><lastmod>2026-10-08</lastmod><image:image><image:loc>https://design.truerobotics.org/help-media/videos/video-dimensions-math.webp</image:loc></image:image><image:image><image:loc>https://design.truerobotics.org/help-media/shots/shot-dimension-editing.webp</image:loc></image:image><image:image><image:loc>https://design.truerobotics.org/help-media/shots/shot-dimension-kinds.webp</image:loc></image:image><video:video><video:thumbnail_loc>https://design.truerobotics.org/help-media/videos/video-dimensions-math.webp</video:thumbnail_loc><video:title>Dimensions drive the shape, and every box understands math and units.</video:title><video:description>We draw a rough rectangle and press D for the Dimension tool. Clicking the bottom side and placing the label opens a box, and typing 3/4 * 2 sets it to 1.5 inches. The right side gets 2.54 cm, which becomes exactly 1 inch. A circle gets a 1/4 inch diameter, and two distances from the sides place it exactly, so the whole sketch turns black.</video:description><video:content_loc>https://design.truerobotics.org/help-media/videos/video-dimensions-math.mp4</video:content_loc><video:duration>106</video:duration><video:family_friendly>yes</video:family_friendly></video:video></url>
<url><loc>https://design.truerobotics.org/help/sketch/constraints/</loc><lastmod>2026-10-08</lastmod><image:image><image:loc>https://design.truerobotics.org/help-media/videos/video-constraints.webp</image:loc></image:image><image:image><image:loc>https://design.truerobotics.org/help-media/shots/shot-constraints-toolbar.webp</image:loc></image:image><image:image><image:loc>https://design.truerobotics.org/help-media/shots/shot-constraint-glyphs.webp</image:loc></image:image><video:video><video:thumbnail_loc>https://design.truerobotics.org/help-media/videos/video-constraints.webp</video:thumbnail_loc><video:title>Select geometry, then pick a constraint that fits.</video:title><video:description>We select two lines and click Parallel, and the second line turns to match the first. Pressing E makes them the same length. A circle and a line become tangent with T, so the line just touches the circle. Finally, clicking the Equal badge and pressing Delete removes that rule.</video:description><video:content_loc>https://design.truerobotics.org/help-media/videos/video-constraints.mp4</video:content_loc><video:duration>93</video:duration><video:family_friendly>yes</video:family_friendly></video:video></url>
<url><loc>https://design.truerobotics.org/help/extrude/</loc><lastmod>2026-10-07</lastmod><image:image><image:loc>https://design.truerobotics.org/help-media/shots/shot-extrude-dialog.webp</image:loc></image:image><image:image><image:loc>https://design.truerobotics.org/help-media/shots/shot-extrude-remove-preview.webp</image:loc></image:image><image:image><image:loc>https://design.truerobotics.org/help-media/shots/shot-extrude-end-types.webp</image:loc></image:image><image:image><image:loc>https://design.truerobotics.org/help-media/shots/shot-extrude-arrow-drag.webp</image:loc></image:image><image:image><image:loc>https://design.truerobotics.org/help-media/shots/shot-face-extrude.webp</image:loc></image:image><image:image><image:loc>https://design.truerobotics.org/help-media/shots/shot-extrude-pick-plane.webp</image:loc></image:image><image:image><image:loc>https://design.truerobotics.org/help-media/videos/video-extrude-first.webp</image:loc></image:image><image:image><image:loc>https://design.truerobotics.org/help-media/shots/shot-cut-dialog.webp</image:loc></image:image><image:image><image:loc>https://design.truerobotics.org/help-media/videos/video-cut-hole.webp</image:loc></image:image><video:video><video:thumbnail_loc>https://design.truerobotics.org/help-media/videos/video-extrude-first.webp</video:thumbnail_loc><video:title>Start with Extrude, sketch on the way, and land back in Extrude.</video:title><video:description>With nothing to extrude, pressing Extrude asks for a plane, so we click the Front plane. We draw a circle and type a 3/4 inch diameter, then press Enter to finish the sketch. The Extrude dialog comes right back with the new region picked and the depth ready, so we type 1/4 and press Enter.</video:description><video:content_loc>https://design.truerobotics.org/help-media/videos/video-extrude-first.mp4</video:content_loc><video:duration>49</video:duration><video:family_friendly>yes</video:family_friendly></video:video><video:video><video:thumbnail_loc>https://design.truerobotics.org/help-media/videos/video-cut-hole.webp</video:thumbnail_loc><video:title>Sketch on the top face, then press Cut.</video:title><video:description>We click the top face of the block and press Sketch. A 1/2 inch circle marks the hole, and Enter finishes the sketch. Pressing Cut opens Cut 1, already set to Remove and Through all, and the red preview shows the hole. Pressing Enter makes the hole, which goes all the way through.</video:description><video:content_loc>https://design.truerobotics.org/help-media/videos/video-cut-hole.mp4</video:content_loc><video:duration>53</video:duration><video:family_friendly>yes</video:family_friendly></video:video></url>
<url><loc>https://design.truerobotics.org/help/revolve/</loc><lastmod>2026-10-08</lastmod></url>
<url><loc>https://design.truerobotics.org/help/sketch-on-faces/</loc><lastmod>2026-10-07</lastmod><image:image><image:loc>https://design.truerobotics.org/help-media/videos/video-sketch-on-face.webp</image:loc></image:image><image:image><image:loc>https://design.truerobotics.org/help-media/shots/shot-face-selected.webp</image:loc></image:image><image:image><image:loc>https://design.truerobotics.org/help-media/shots/shot-face-sketch-reference.webp</image:loc></image:image><image:image><image:loc>https://design.truerobotics.org/help-media/photos/photo-ramp-test-1280.webp</image:loc></image:image><video:video><video:thumbnail_loc>https://design.truerobotics.org/help-media/videos/video-sketch-on-face.webp</video:thumbnail_loc><video:title>Sketch on faces to build a part up, one feature at a time.</video:title><video:description>We click the top face of the base and press Sketch, and the face outline shows in gray. A 2 by 1/8 inch rectangle from the corner becomes the wall, and a 1 1/2 inch Add extrude raises it into one L shaped part. Then we sketch a 1/4 inch circle on the front of the wall, place it 1 inch across and 1 inch up, and cut it out with Cut, which is already set to Remove and Through all.</video:description><video:content_loc>https://design.truerobotics.org/help-media/videos/video-sketch-on-face.mp4</video:content_loc><video:duration>124</video:duration><video:family_friendly>yes</video:family_friendly></video:video></url>
<url><loc>https://design.truerobotics.org/help/planes/</loc><lastmod>2026-10-08</lastmod><image:image><image:loc>https://design.truerobotics.org/help-media/shots/shot-plane-pick.webp</image:loc></image:image><image:image><image:loc>https://design.truerobotics.org/help-media/shots/shot-plane-offset.webp</image:loc></image:image><image:image><image:loc>https://design.truerobotics.org/help-media/shots/shot-plane-midway.webp</image:loc></image:image><image:image><image:loc>https://design.truerobotics.org/help-media/shots/shot-plane-angle.webp</image:loc></image:image><image:image><image:loc>https://design.truerobotics.org/help-media/videos/video-plane-loft.webp</image:loc></image:image><image:image><image:loc>https://design.truerobotics.org/help-media/shots/shot-tree-plane-menu.webp</image:loc></image:image><video:video><video:thumbnail_loc>https://design.truerobotics.org/help-media/videos/video-plane-loft.webp</video:thumbnail_loc><video:title>Make a plane, sketch on it, and loft between the profiles.</video:title><video:description>With the Top plane selected, Shift+P opens Plane, and typing 2 makes Plane 1 two inches above Top. We sketch a 3 inch circle on Plane 1 and a 3/4 inch circle on Top. Shift+L opens Loft with the small circle already listed, and clicking the big circle adds it. Enter turns the preview into a solid cone.</video:description><video:content_loc>https://design.truerobotics.org/help-media/videos/video-plane-loft.mp4</video:content_loc><video:duration>94</video:duration><video:family_friendly>yes</video:family_friendly></video:video></url>
<url><loc>https://design.truerobotics.org/help/axis/</loc><lastmod>2026-10-08</lastmod></url>
<url><loc>https://design.truerobotics.org/help/sweep/</loc><lastmod>2026-10-08</lastmod><image:image><image:loc>https://design.truerobotics.org/help-media/videos/video-sweep-handle.webp</image:loc></image:image><image:image><image:loc>https://design.truerobotics.org/help-media/shots/shot-sweep-dialog.webp</image:loc></image:image><video:video><video:thumbnail_loc>https://design.truerobotics.org/help-media/videos/video-sweep-handle.webp</video:thumbnail_loc><video:title>Sweep carries a profile along a path of lines and arcs.</video:title><video:description>The circle we just drew is already picked as the profile when Shift+W opens Sweep. Pointing at the arc lights up the whole path, both legs and the arc. One click picks it, and the purple preview follows every curve. Enter makes the handle.</video:description><video:content_loc>https://design.truerobotics.org/help-media/videos/video-sweep-handle.mp4</video:content_loc><video:duration>35</video:duration><video:family_friendly>yes</video:family_friendly></video:video></url>
<url><loc>https://design.truerobotics.org/help/loft/</loc><lastmod>2026-10-07</lastmod><image:image><image:loc>https://design.truerobotics.org/help-media/shots/shot-loft-dialog.webp</image:loc></image:image><image:image><image:loc>https://design.truerobotics.org/help-media/videos/video-plane-loft.webp</image:loc></image:image><image:image><image:loc>https://design.truerobotics.org/help-media/shots/shot-loft-smooth.webp</image:loc></image:image><video:video><video:thumbnail_loc>https://design.truerobotics.org/help-media/videos/video-plane-loft.webp</video:thumbnail_loc><video:title>Make a plane, sketch on it, and loft between the profiles.</video:title><video:description>With the Top plane selected, Shift+P opens Plane, and typing 2 makes Plane 1 two inches above Top. We sketch a 3 inch circle on Plane 1 and a 3/4 inch circle on Top. Shift+L opens Loft with the small circle already listed, and clicking the big circle adds it. Enter turns the preview into a solid cone.</video:description><video:content_loc>https://design.truerobotics.org/help-media/videos/video-plane-loft.mp4</video:content_loc><video:duration>94</video:duration><video:family_friendly>yes</video:family_friendly></video:video></url>
<url><loc>https://design.truerobotics.org/help/fillet-edges/</loc><lastmod>2026-10-08</lastmod><image:image><image:loc>https://design.truerobotics.org/help-media/shots/shot-fillet-dialog.webp</image:loc></image:image><image:image><image:loc>https://design.truerobotics.org/help-media/videos/video-fillet-edges.webp</image:loc></image:image><image:image><image:loc>https://design.truerobotics.org/help-media/shots/shot-chamfer-dialog.webp</image:loc></image:image><image:image><image:loc>https://design.truerobotics.org/help-media/shots/shot-fillet-hole-edge.webp</image:loc></image:image><video:video><video:thumbnail_loc>https://design.truerobotics.org/help-media/videos/video-fillet-edges.webp</video:thumbnail_loc><video:title>Click an edge or a whole face, and switch between Fillet and Chamfer any time.</video:title><video:description>We press Shift and F to start Fillet, point at the top front edge until it lights up and click it. Clicking the top face picks every edge around it, the rim of the hole too, and the preview rounds them with the 1/8 inch radius it starts with. Clicking Chamfer cuts the same edges off flat instead, and clicking Fillet rounds them again. The green check adds Fillet 1 to the feature list.</video:description><video:content_loc>https://design.truerobotics.org/help-media/videos/video-fillet-edges.mp4</video:content_loc><video:duration>55</video:duration><video:family_friendly>yes</video:family_friendly></video:video></url>
<url><loc>https://design.truerobotics.org/help/mirror/</loc><lastmod>2026-10-08</lastmod><image:image><image:loc>https://design.truerobotics.org/help-media/shots/shot-mirror-dialog.webp</image:loc></image:image><image:image><image:loc>https://design.truerobotics.org/help-media/videos/video-mirror-holes.webp</image:loc></image:image><image:image><image:loc>https://design.truerobotics.org/help-media/shots/shot-mirror-parts.webp</image:loc></image:image><image:image><image:loc>https://design.truerobotics.org/help-media/shots/shot-mirror-four-holes.webp</image:loc></image:image><video:video><video:thumbnail_loc>https://design.truerobotics.org/help-media/videos/video-mirror-holes.webp</video:thumbnail_loc><video:title>Mirror a hole across one plane, then mirror both across another.</video:title><video:description>We press Shift and M to start Mirror, click Cut 1 in the feature list as the hole to copy, then click the Mirror plane box and the Right plane. The copy shows on the other side, and the green check finishes Mirror 1. A second Mirror copies Cut 1 and Mirror 1 across the Front plane, so the plate gets a hole near every corner.</video:description><video:content_loc>https://design.truerobotics.org/help-media/videos/video-mirror-holes.mp4</video:content_loc><video:duration>67</video:duration><video:family_friendly>yes</video:family_friendly></video:video></url>
<url><loc>https://design.truerobotics.org/help/linear-pattern/</loc><lastmod>2026-10-08</lastmod><image:image><image:loc>https://design.truerobotics.org/help-media/shots/shot-linear-pattern-dialog.webp</image:loc></image:image><image:image><image:loc>https://design.truerobotics.org/help-media/shots/shot-linear-second-direction.webp</image:loc></image:image></url>
<url><loc>https://design.truerobotics.org/help/circular-pattern/</loc><lastmod>2026-10-08</lastmod><image:image><image:loc>https://design.truerobotics.org/help-media/shots/shot-circular-pattern-dialog.webp</image:loc></image:image><image:image><image:loc>https://design.truerobotics.org/help-media/videos/video-circular-pattern.webp</image:loc></image:image><video:video><video:thumbnail_loc>https://design.truerobotics.org/help-media/videos/video-circular-pattern.webp</video:thumbnail_loc><video:title>A circular pattern turns one bolt hole into six, evenly spaced around the center hole.</video:title><video:description>We press Shift and O for Circular pattern and click Cut 2, the bolt hole, in the feature list. We click the Axis box and then the inside of the center hole, so the copies turn around its middle. Clicking the Count arrow up to 6, with the angle at 360, spreads six holes evenly around the disc, and the green check finishes it.</video:description><video:content_loc>https://design.truerobotics.org/help-media/videos/video-circular-pattern.mp4</video:content_loc><video:duration>53</video:duration><video:family_friendly>yes</video:family_friendly></video:video></url>
<url><loc>https://design.truerobotics.org/help/color/</loc><lastmod>2026-10-08</lastmod><image:image><image:loc>https://design.truerobotics.org/help-media/shots/shot-color-dialog.webp</image:loc></image:image><image:image><image:loc>https://design.truerobotics.org/help-media/videos/video-color-part.webp</image:loc></image:image><image:image><image:loc>https://design.truerobotics.org/help-media/shots/shot-color-faces.webp</image:loc></image:image><image:image><image:loc>https://design.truerobotics.org/help-media/shots/shot-color-done.webp</image:loc></image:image><video:video><video:thumbnail_loc>https://design.truerobotics.org/help-media/videos/video-color-part.webp</video:thumbnail_loc><video:title>Paint a whole part, then paint single faces on top.</video:title><video:description>We press Shift and A to start Color and click the part, which shows up in Parts to color and turns True Robotics purple, the color Color starts with. Clicking Red paints the whole part red right away, and the green check adds Color 1. A second Color in Faces mode paints just the top face blue, so the finished part is red with a blue top.</video:description><video:content_loc>https://design.truerobotics.org/help-media/videos/video-color-part.mp4</video:content_loc><video:duration>56</video:duration><video:family_friendly>yes</video:family_friendly></video:video></url>
<url><loc>https://design.truerobotics.org/help/feature-tree/</loc><lastmod>2026-10-08</lastmod><image:image><image:loc>https://design.truerobotics.org/help-media/shots/shot-tree-menu.webp</image:loc></image:image><image:image><image:loc>https://design.truerobotics.org/help-media/shots/shot-tree-nested.webp</image:loc></image:image><image:image><image:loc>https://design.truerobotics.org/help-media/shots/shot-edit-rollback.webp</image:loc></image:image><image:image><image:loc>https://design.truerobotics.org/help-media/videos/video-edit-feature.webp</image:loc></image:image><image:image><image:loc>https://design.truerobotics.org/help-media/shots/shot-tree-plane-menu.webp</image:loc></image:image><image:image><image:loc>https://design.truerobotics.org/help-media/shots/shot-delete-dependents.webp</image:loc></image:image><image:image><image:loc>https://design.truerobotics.org/help-media/shots/shot-tree-warning.webp</image:loc></image:image><image:image><image:loc>https://design.truerobotics.org/help-media/shots/shot-panel-collapsed.webp</image:loc></image:image><video:video><video:thumbnail_loc>https://design.truerobotics.org/help-media/videos/video-edit-feature.webp</video:thumbnail_loc><video:title>Change an early feature and everything after it rebuilds.</video:title><video:description>We double-click Extrude 1 in the feature tree, and the features after it dim while we edit. Typing 1 makes the block twice as tall. When we press Enter, the hole is cut again after the taller block, so it still goes all the way through.</video:description><video:content_loc>https://design.truerobotics.org/help-media/videos/video-edit-feature.mp4</video:content_loc><video:duration>30</video:duration><video:family_friendly>yes</video:family_friendly></video:video></url>
<url><loc>https://design.truerobotics.org/help/undo-redo/</loc><lastmod>2026-10-07</lastmod><image:image><image:loc>https://design.truerobotics.org/help-media/shots/shot-undo-tooltip.webp</image:loc></image:image></url>
<url><loc>https://design.truerobotics.org/help/units-and-math/</loc><lastmod>2026-10-08</lastmod><image:image><image:loc>https://design.truerobotics.org/help-media/shots/shot-units-menu.webp</image:loc></image:image><image:image><image:loc>https://design.truerobotics.org/help-media/shots/shot-depth-math-preview.webp</image:loc></image:image><image:image><image:loc>https://design.truerobotics.org/help-media/shots/shot-number-arrows.webp</image:loc></image:image><image:image><image:loc>https://design.truerobotics.org/help-media/shots/shot-depth-error.webp</image:loc></image:image></url>
<url><loc>https://design.truerobotics.org/help/export-stl/</loc><lastmod>2026-10-07</lastmod><image:image><image:loc>https://design.truerobotics.org/help-media/videos/video-export-stl.webp</image:loc></image:image><image:image><image:loc>https://design.truerobotics.org/help-media/shots/shot-export-dialog.webp</image:loc></image:image><image:image><image:loc>https://design.truerobotics.org/help-media/shots/shot-export-step.webp</image:loc></image:image><image:image><image:loc>https://design.truerobotics.org/help-media/shots/shot-export-separate.webp</image:loc></image:image><image:image><image:loc>https://design.truerobotics.org/help-media/shots/shot-asm-export.webp</image:loc></image:image><image:image><image:loc>https://design.truerobotics.org/help-media/shots/shot-export-done.webp</image:loc></image:image><image:image><image:loc>https://design.truerobotics.org/help-media/photos/photo-first-drive-1280.webp</image:loc></image:image><video:video><video:thumbnail_loc>https://design.truerobotics.org/help-media/videos/video-export-stl.webp</video:thumbnail_loc><video:title>Export one file or one per part, in Standard or Fine.</video:title><video:description>We click Export, keep STL, and both parts are checked with their sizes. Choosing A file for each part and Fine resolution gives every part its own smooth STL file. Clicking Export saves both files to the Downloads folder, in millimeters.</video:description><video:content_loc>https://design.truerobotics.org/help-media/videos/video-export-stl.mp4</video:content_loc><video:duration>30</video:duration><video:family_friendly>yes</video:family_friendly></video:video></url>
<url><loc>https://design.truerobotics.org/help/assemblies/</loc><lastmod>2026-10-07</lastmod><image:image><image:loc>https://design.truerobotics.org/help-media/shots/shot-asm-workspace.webp</image:loc></image:image><image:image><image:loc>https://design.truerobotics.org/help-media/shots/shot-asm-autosave-prompt.webp</image:loc></image:image><image:image><image:loc>https://design.truerobotics.org/help-media/shots/shot-asm-explode.webp</image:loc></image:image><image:image><image:loc>https://design.truerobotics.org/help-media/shots/shot-asm-refresh-menu.webp</image:loc></image:image><image:image><image:loc>https://design.truerobotics.org/help-media/shots/shot-asm-shortcuts-dialog.webp</image:loc></image:image></url>
<url><loc>https://design.truerobotics.org/help/assemblies/insert/</loc><lastmod>2026-10-07</lastmod><image:image><image:loc>https://design.truerobotics.org/help-media/videos/video-asm-insert.webp</image:loc></image:image><image:image><image:loc>https://design.truerobotics.org/help-media/shots/shot-asm-insert-dialog.webp</image:loc></image:image><image:image><image:loc>https://design.truerobotics.org/help-media/shots/shot-asm-stl-units.webp</image:loc></image:image><video:video><video:thumbnail_loc>https://design.truerobotics.org/help-media/videos/video-asm-insert.webp</video:thumbnail_loc><video:title>Insert parts you made, with as many copies as you need, and STL files from anywhere.</video:title><video:description>In a new assembly we click Insert and pick Plate and Standoff from the parts we have saved, with two copies of the standoff. The plate comes in first, so it is fixed in place. Then we insert an STL file from the computer, keep millimeters as its units, and it lands beside the other parts.</video:description><video:content_loc>https://design.truerobotics.org/help-media/videos/video-asm-insert.mp4</video:content_loc><video:duration>53</video:duration><video:family_friendly>yes</video:family_friendly></video:video></url>
<url><loc>https://design.truerobotics.org/help/assemblies/mates/</loc><lastmod>2026-10-07</lastmod><image:image><image:loc>https://design.truerobotics.org/help-media/videos/video-asm-fastened.webp</image:loc></image:image><image:image><image:loc>https://design.truerobotics.org/help-media/shots/shot-asm-connector-hover.webp</image:loc></image:image><image:image><image:loc>https://design.truerobotics.org/help-media/shots/shot-asm-mate-dialog.webp</image:loc></image:image><image:image><image:loc>https://design.truerobotics.org/help-media/shots/shot-asm-toolbar.webp</image:loc></image:image><image:image><image:loc>https://design.truerobotics.org/help-media/shots/shot-asm-mate-offset-angle.webp</image:loc></image:image><image:image><image:loc>https://design.truerobotics.org/help-media/videos/video-asm-revolute.webp</image:loc></image:image><image:image><image:loc>https://design.truerobotics.org/help-media/shots/shot-asm-mate-error.webp</image:loc></image:image><video:video><video:thumbnail_loc>https://design.truerobotics.org/help-media/videos/video-asm-fastened.webp</video:thumbnail_loc><video:title>Fastened mates lock parts together, like screwing standoffs onto a robot plate.</video:title><video:description>We click Fastened, then a spot near a corner of the plate, then the side of a standoff near its bottom, and the standoff stands up on that corner. Enter finishes the mate. Shift and F starts another one for the second standoff on the opposite corner. Shift and E explodes the view to see each part, and pressing it again puts them back.</video:description><video:content_loc>https://design.truerobotics.org/help-media/videos/video-asm-fastened.mp4</video:content_loc><video:duration>67</video:duration><video:family_friendly>yes</video:family_friendly></video:video><video:video><video:thumbnail_loc>https://design.truerobotics.org/help-media/videos/video-asm-revolute.webp</video:thumbnail_loc><video:title>A Revolute mate lets a part spin around one axis, like a wheel on an axle.</video:title><video:description>We click Revolute, then the side of the axle near its top, then the inside of the wheel hub&apos;s axle hole. The wheel jumps onto the axle upside down, so we click Flip, then the check to finish. Dragging the wheel spins it around the axle, and it never slides off.</video:description><video:content_loc>https://design.truerobotics.org/help-media/videos/video-asm-revolute.mp4</video:content_loc><video:duration>48</video:duration><video:family_friendly>yes</video:family_friendly></video:video></url>
<url><loc>https://design.truerobotics.org/help/tutorials/</loc><lastmod>2026-10-07</lastmod><image:image><image:loc>https://design.truerobotics.org/help-media/photos/photo-classroom-build-1280.webp</image:loc></image:image></url>
<url><loc>https://design.truerobotics.org/help/tutorials/phone-stand/</loc><lastmod>2026-10-07</lastmod><image:image><image:loc>https://design.truerobotics.org/help-media/videos/video-tut-phone-stand.webp</image:loc></image:image><image:image><image:loc>https://design.truerobotics.org/help-media/shots/shot-tut-stand-base.webp</image:loc></image:image><image:image><image:loc>https://design.truerobotics.org/help-media/shots/shot-tut-stand-parts.webp</image:loc></image:image><image:image><image:loc>https://design.truerobotics.org/help-media/shots/shot-tut-stand-done.webp</image:loc></image:image><video:video><video:thumbnail_loc>https://design.truerobotics.org/help-media/videos/video-tut-phone-stand.webp</video:thumbnail_loc><video:title>The last steps of the phone stand: the cable notch and the group.</video:title><video:description>The base, the sloped back and the front lip are in place. We drag in a box hole and type its size and position in the settings panel, so it sits in the middle of the lip. Ctrl and A selects every shape, and Ctrl and G groups them into one part with a notch for the charging cable.</video:description><video:content_loc>https://design.truerobotics.org/help-media/videos/video-tut-phone-stand.mp4</video:content_loc><video:duration>65</video:duration><video:family_friendly>yes</video:family_friendly></video:video></url>
<url><loc>https://design.truerobotics.org/help/tutorials/wheel-hub/</loc><lastmod>2026-10-07</lastmod><image:image><image:loc>https://design.truerobotics.org/help-media/shots/shot-tut-hub-parts.webp</image:loc></image:image><image:image><image:loc>https://design.truerobotics.org/help-media/shots/shot-tut-hub-done.webp</image:loc></image:image><image:image><image:loc>https://design.truerobotics.org/help-media/photos/photo-motor-mounts-1280.webp</image:loc></image:image></url>
<url><loc>https://design.truerobotics.org/help/tutorials/draw-a-square/</loc><lastmod>2026-10-07</lastmod><image:image><image:loc>https://design.truerobotics.org/help-media/videos/video-square-rectangle.webp</image:loc></image:image><image:image><image:loc>https://design.truerobotics.org/help-media/shots/shot-tut-square-cube.webp</image:loc></image:image><image:image><image:loc>https://design.truerobotics.org/help-media/shots/shot-tut-square-center.webp</image:loc></image:image><image:image><image:loc>https://design.truerobotics.org/help-media/shots/shot-tut-square-lines.webp</image:loc></image:image><image:image><image:loc>https://design.truerobotics.org/help-media/shots/shot-tut-square-polygon.webp</image:loc></image:image><video:video><video:thumbnail_loc>https://design.truerobotics.org/help-media/videos/video-square-rectangle.webp</video:thumbnail_loc><video:title>Draw an exact square with the Corner rectangle, then make it a cube.</video:title><video:description>In a sketch on the Top plane, we press G for the Corner rectangle and click the origin. We type 1, press Tab, type 1 and press Enter, and an exact 1 inch square appears in black. Enter finishes the sketch, Shift+E opens Extrude, and a depth of 1 turns the square into a cube.</video:description><video:content_loc>https://design.truerobotics.org/help-media/videos/video-square-rectangle.mp4</video:content_loc><video:duration>45</video:duration><video:family_friendly>yes</video:family_friendly></video:video></url>
<url><loc>https://design.truerobotics.org/help/tutorials/mounting-plate/</loc><lastmod>2026-10-07</lastmod><image:image><image:loc>https://design.truerobotics.org/help-media/videos/video-mounting-plate.webp</image:loc></image:image><image:image><image:loc>https://design.truerobotics.org/help-media/photos/photo-mounting-plate-1280.webp</image:loc></image:image><image:image><image:loc>https://design.truerobotics.org/help-media/shots/shot-tut-plate-sketch.webp</image:loc></image:image><image:image><image:loc>https://design.truerobotics.org/help-media/shots/shot-tut-plate-done.webp</image:loc></image:image><video:video><video:thumbnail_loc>https://design.truerobotics.org/help-media/videos/video-mounting-plate.webp</video:thumbnail_loc><video:title>A mounting plate with four holes, start to finish.</video:title><video:description>We draw a 3 by 1 1/2 inch plate from the origin, then turn on Construction and draw a dashed 2 1/2 by 1 inch rectangle inside it. Two 1/4 inch dimensions place it evenly, and a 1/8 inch circle snaps onto each of its corners. The sketch turns fully defined, and a 1/8 inch extrude makes the finished plate.</video:description><video:content_loc>https://design.truerobotics.org/help-media/videos/video-mounting-plate.mp4</video:content_loc><video:duration>127</video:duration><video:family_friendly>yes</video:family_friendly></video:video></url>
<url><loc>https://design.truerobotics.org/help/tutorials/hex-standoff/</loc><lastmod>2026-10-07</lastmod><image:image><image:loc>https://design.truerobotics.org/help-media/videos/video-hexagon-across-flats.webp</image:loc></image:image><image:image><image:loc>https://design.truerobotics.org/help-media/shots/shot-hexagon-across-flats.webp</image:loc></image:image><image:image><image:loc>https://design.truerobotics.org/help-media/shots/shot-tut-standoff-done.webp</image:loc></image:image><image:image><image:loc>https://design.truerobotics.org/help-media/photos/photo-motor-mounts-1280.webp</image:loc></image:image><video:video><video:thumbnail_loc>https://design.truerobotics.org/help-media/videos/video-hexagon-across-flats.webp</video:thumbnail_loc><video:title>Draw a hexagon, size it across the flats, and extrude a standoff.</video:title><video:description>We press P for the Polygon tool, click the origin and place a level corner, which makes a hexagon with flat top and bottom. With the Dimension tool we click the top and bottom sides and type 3/8, so it measures 3/8 inch across the flats. A 1/8 inch circle at the center makes the hole, and the sketch turns fully defined. A 1/2 inch extrude finishes the standoff.</video:description><video:content_loc>https://design.truerobotics.org/help-media/videos/video-hexagon-across-flats.mp4</video:content_loc><video:duration>84</video:duration><video:family_friendly>yes</video:family_friendly></video:video></url>
<url><loc>https://design.truerobotics.org/help/tutorials/slot/</loc><lastmod>2026-10-07</lastmod><image:image><image:loc>https://design.truerobotics.org/help-media/videos/video-slot.webp</image:loc></image:image><image:image><image:loc>https://design.truerobotics.org/help-media/shots/shot-tut-slot-sketch.webp</image:loc></image:image><image:image><image:loc>https://design.truerobotics.org/help-media/shots/shot-tut-slot-done.webp</image:loc></image:image><video:video><video:thumbnail_loc>https://design.truerobotics.org/help-media/videos/video-slot.webp</video:thumbnail_loc><video:title>Lines, arcs and tangents make a smooth slot.</video:title><video:description>On the plate&apos;s top face we draw two level lines, then join their ends with two 3 point arcs. Tangent constraints make each arc meet the lines smoothly, and a 1/4 inch dimension sets the width, turning the ends into half circles. Shift+C opens Cut, already set to Remove and Through all, and Enter cuts the slot out of the plate.</video:description><video:content_loc>https://design.truerobotics.org/help-media/videos/video-slot.mp4</video:content_loc><video:duration>127</video:duration><video:family_friendly>yes</video:family_friendly></video:video></url>
<url><loc>https://design.truerobotics.org/help/tutorials/l-bracket/</loc><lastmod>2026-10-07</lastmod><image:image><image:loc>https://design.truerobotics.org/help-media/videos/video-sketch-on-face.webp</image:loc></image:image><image:image><image:loc>https://design.truerobotics.org/help-media/shots/shot-tut-bracket-face-sketch.webp</image:loc></image:image><image:image><image:loc>https://design.truerobotics.org/help-media/shots/shot-tut-bracket-done.webp</image:loc></image:image><image:image><image:loc>https://design.truerobotics.org/help-media/photos/photo-classroom-build-1280.webp</image:loc></image:image><video:video><video:thumbnail_loc>https://design.truerobotics.org/help-media/videos/video-sketch-on-face.webp</video:thumbnail_loc><video:title>Sketch on faces to build a part up, one feature at a time.</video:title><video:description>We click the top face of the base and press Sketch, and the face outline shows in gray. A 2 by 1/8 inch rectangle from the corner becomes the wall, and a 1 1/2 inch Add extrude raises it into one L shaped part. Then we sketch a 1/4 inch circle on the front of the wall, place it 1 inch across and 1 inch up, and cut it out with Cut, which is already set to Remove and Through all.</video:description><video:content_loc>https://design.truerobotics.org/help-media/videos/video-sketch-on-face.mp4</video:content_loc><video:duration>124</video:duration><video:family_friendly>yes</video:family_friendly></video:video></url>
<url><loc>https://design.truerobotics.org/help/tutorials/sweep-handle/</loc><lastmod>2026-10-07</lastmod><image:image><image:loc>https://design.truerobotics.org/help-media/videos/video-sweep-handle.webp</image:loc></image:image><image:image><image:loc>https://design.truerobotics.org/help-media/shots/shot-tut-handle-path.webp</image:loc></image:image><image:image><image:loc>https://design.truerobotics.org/help-media/shots/shot-sweep-dialog.webp</image:loc></image:image><image:image><image:loc>https://design.truerobotics.org/help-media/shots/shot-tut-handle-done.webp</image:loc></image:image><video:video><video:thumbnail_loc>https://design.truerobotics.org/help-media/videos/video-sweep-handle.webp</video:thumbnail_loc><video:title>Sweep carries a profile along a path of lines and arcs.</video:title><video:description>The circle we just drew is already picked as the profile when Shift+W opens Sweep. Pointing at the arc lights up the whole path, both legs and the arc. One click picks it, and the purple preview follows every curve. Enter makes the handle.</video:description><video:content_loc>https://design.truerobotics.org/help-media/videos/video-sweep-handle.mp4</video:content_loc><video:duration>35</video:duration><video:family_friendly>yes</video:family_friendly></video:video></url>
<url><loc>https://design.truerobotics.org/help/tutorials/loft-funnel/</loc><lastmod>2026-10-07</lastmod><image:image><image:loc>https://design.truerobotics.org/help-media/videos/video-plane-loft.webp</image:loc></image:image><image:image><image:loc>https://design.truerobotics.org/help-media/shots/shot-loft-dialog.webp</image:loc></image:image><image:image><image:loc>https://design.truerobotics.org/help-media/shots/shot-tut-funnel-done.webp</image:loc></image:image><video:video><video:thumbnail_loc>https://design.truerobotics.org/help-media/videos/video-plane-loft.webp</video:thumbnail_loc><video:title>Make a plane, sketch on it, and loft between the profiles.</video:title><video:description>With the Top plane selected, Shift+P opens Plane, and typing 2 makes Plane 1 two inches above Top. We sketch a 3 inch circle on Plane 1 and a 3/4 inch circle on Top. Shift+L opens Loft with the small circle already listed, and clicking the big circle adds it. Enter turns the preview into a solid cone.</video:description><video:content_loc>https://design.truerobotics.org/help-media/videos/video-plane-loft.mp4</video:content_loc><video:duration>94</video:duration><video:family_friendly>yes</video:family_friendly></video:video></url>
<url><loc>https://design.truerobotics.org/help/tutorials/spinning-wheel/</loc><lastmod>2026-10-07</lastmod><image:image><image:loc>https://design.truerobotics.org/help-media/videos/video-tut-spinning-wheel.webp</image:loc></image:image><image:image><image:loc>https://design.truerobotics.org/help-media/shots/shot-tut-wheel-axle-base.webp</image:loc></image:image><image:image><image:loc>https://design.truerobotics.org/help-media/shots/shot-asm-autosave-prompt.webp</image:loc></image:image><image:image><image:loc>https://design.truerobotics.org/help-media/shots/shot-tut-wheel-inserted.webp</image:loc></image:image><image:image><image:loc>https://design.truerobotics.org/help-media/shots/shot-asm-mate-dialog.webp</image:loc></image:image><image:image><image:loc>https://design.truerobotics.org/help-media/shots/shot-tut-wheel-done.webp</image:loc></image:image><video:video><video:thumbnail_loc>https://design.truerobotics.org/help-media/videos/video-tut-spinning-wheel.webp</video:thumbnail_loc><video:title>The whole spinning wheel tutorial, step by step.</video:title><video:description>We click New Assembly, say Yes to autosave and name the file Spinning Wheel. Insert brings in Axle Base first, so it is fixed, then Wheel Hub. Shift and R starts a Revolute mate: we click the axle near its top, then inside the wheel hub&apos;s axle hole, click Flip so the hub points up, and click the check. Dragging the wheel spins it on the axle.</video:description><video:content_loc>https://design.truerobotics.org/help-media/videos/video-tut-spinning-wheel.mp4</video:content_loc><video:duration>83</video:duration><video:family_friendly>yes</video:family_friendly></video:video></url>
<url><loc>https://design.truerobotics.org/help/keyboard-shortcuts/</loc><lastmod>2026-10-08</lastmod><image:image><image:loc>https://design.truerobotics.org/help-media/shots/shot-shortcuts-dialog.webp</image:loc></image:image><image:image><image:loc>https://design.truerobotics.org/help-media/shots/shot-basic-shortcuts-dialog.webp</image:loc></image:image></url>
<url><loc>https://design.truerobotics.org/help/troubleshooting/</loc><lastmod>2026-10-08</lastmod><image:image><image:loc>https://design.truerobotics.org/help-media/shots/shot-open-sketch-gap.webp</image:loc></image:image><image:image><image:loc>https://design.truerobotics.org/help-media/shots/shot-tree-warning.webp</image:loc></image:image></url>
<url><loc>https://design.truerobotics.org/help/for-teachers/</loc><lastmod>2026-10-07</lastmod><image:image><image:loc>https://design.truerobotics.org/help-media/photos/photo-classroom-build-1280.webp</image:loc></image:image><image:image><image:loc>https://design.truerobotics.org/help-media/shots/shot-phone-extrude.webp</image:loc></image:image><image:image><image:loc>https://design.truerobotics.org/help-media/shots/shot-new-project-basic.webp</image:loc></image:image><image:image><image:loc>https://design.truerobotics.org/help-media/photos/photo-ramp-test-1280.webp</image:loc></image:image></url>
</urlset>
